HSS

Extremely popular blades, excellent for most types of materials. Use any of these blades in your E sets.

Blade	Picture	Description
E100 151-29034		Best for deburring metals with spiral chips
E100L 151-29098		E100 for left-handed users.
E110 151-29038		B10 geometry with thin-nose for small holes with min. diameter 2mm (0.08 inch).
E111 151-29109		E100 geometry with thinner nose for very small holes with min. diameter 1.5mm (0.06 inch).
E120 151-29058		B20 geometry with thin nose for small holes.
E200 151-29040		Symmetric. Best for deburring metals with powdery chips and plastic.
E250 151-29106		Specially designed for hard plastics.
E300 151-29042		For metals with spiral chips and plastics, simultaneously deburrs the inside and outside of holes up to 6mm (0.24 inch).
E320 151-29043		For metals with powdery chips and plastics, simultaneously deburrs the inside and outside of holes up to 6mm (0.24 inch).
E350 151-29044		For most types of materials with powdery chips.
E600 151-29045		Removes burrs from hard to reach hole back-edge applications up to 22mm (0.78 inch).
E700 151-29047		Deburrs the inside surface of holes and cross holes.

Cobalt

Long-lasting and economical blades

Blade	Picture	Description
E100S 151-29211		Long-lasting, cobalt-enriched. E100 geometry for spiral chips materials.
E200S 151-00107		Long-lasting, cobalt-enriched. E200 geometry for spiral chips materials.

TiN Coated

Significantly increases HSS blade life with Titanium Nitride

Blade	Picture	Description
E100P 151-29037		TiN coated for high resistance to wear. E100 geometry.
E100PL 151-00022		TiN coated for high resistance to wear. E100 geometry for left handed.
E110P 151-29039		TiN coated for high resistance to wear. E110 geometry.
E111P 151-00099		TiN coated for high resistance to wear. E111 geometry.
E200P 151-29099		TiN coated for high resistance to wear. E200 geometry.
E300P 151-29227		TiN coated for high resistance to wear. E300 geometry.

Carbide

The toughest wear-resistant blades, best for hardened steel and cast iron .

Blade	Picture	Description
E100C 151-29035		Wear resistant carbide. E100 geometry, HSS shank.
E200C 151-29041		Wear resistant carbide. E200 geometry, HSS shank.

Diamond

For glass and carbide work pieces.

Blade	Picture	Description
E100D 151-29036		Diamond-coated. E100 geometry.

Spiral Chips: Steel, Aluminum, Copper
Powdery Chips: Brass, Cast Iron

Safety Note: Exercise caution when handling sharp blades.
For additional technical information, see the complete Blade Index